|
|
Post by Chris Wright on Nov 29, 2015 15:39:13 GMT
Eric (EJI) is looking for wheel inserts for a Cooper T39 as illustrated in the plans and photo's below. I presume to fit BWA style wheels. Can anyone help?   |
|
|
|
Post by cambridge on Jan 13, 2016 22:09:57 GMT
Chris,
I did a set of these for Tom Wysom's Kieft. I think Steve Francis cast them for us in resin. I'll ask him and let you know. I'm sure Tom won't mind.
I will have made them to fit PP wheels, his 15" ones as they are what I would have had at the time. So they may need reducing in size for a 13" wheel. Assuming they are the right pattern, of course.
Cheers,
Martin
|
|
|
|
Post by cambridge on Jan 13, 2016 23:17:52 GMT
OK, Steve has the masters. They are a bit different for the Kieft, but very close for the Cooper.
Martin
|
|
EJI
Allowed a 327 V-8
Posts: 39
|
Post by EJI on Jan 14, 2016 7:29:46 GMT
Hi Martin,
I think I/we have a solution thank you. A friend of mine ( TIMR on here) has had his son do a CAD drawing of the insert at scale 15" and that has been sent to Devis Designs. They have come back with photos of a preliminary test insert printed on a 3D printer which look very good. As soon as we have a physical sample I will post an image on here. Thanks again
Eric |
|
