|
Post by munter on Aug 9, 2015 1:38:34 GMT
Here are a few pictures of a quick build I did 12 months ago. It started by me fiddling with a Penelope Pitlane Clubman chassis. I hadn't used a PP chassis before and I can confirm that they are a great chassis. The weight/COG is low so they handle well. I used Racer wires wheels (too wide and too shiney) and a M/T resins ff lo po 14.5k rpm motor. Shabby detail painting on the rear quarter light surround. A brass motor plate was soldered across the chassis to accept the ff motor.
|
|